Quote:
Originally Posted by Bader
How much shorter is a 32 rear housing than a 40?
|
I get .456" longer for the 40 housing.
I have the length figured out for the new shorter 32 torque tube. It would be 52.92" The difference in length of a 34 torque tube and a driveshaft is 1.68" If the same coupling dimensions are assumed, the new 32 driveshaft would be 51.24"
The dimension I would like to get is the distance from a 34 flange face to the pin hole in the pinion shaft. That would tell me if driveshaft dimension can be used or would need to be adjusted to get the hole in the right place.
Nice puzzle!