View Single Post
Old 10-12-2017, 10:21 AM   #9
abachman3
Senior Member
 
abachman3's Avatar
 
Join Date: Jun 2013
Location: Western Springs, IL
Posts: 142
Default Re: camshaft nut problems

Most people that I know use a chisel and hammer to loosen that nut. They also tighten it in the same manner, which is why the nuts are so buggered up in the first place. Just place the chisel towards the outside edge of the flat side of the nut and hit it well with the hammer. It works, but is not kind to the nut.
abachman3 is offline   Reply With Quote