View Single Post
Old 10-15-2019, 10:47 AM   #4
Senior Member
rotorwrench's Avatar
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 10,648
Default Re: Rear spring shackle

Something doesn't seem right with those figures since the fit would be too tight unless the bushing bore is reamed. The two parts should be close to each other in size. At least within a few thousands. Parts that are usually reamed for best fit are still relatively close in size to begin with . If not, the parts aren't made correctly or they are the wrong parts.
rotorwrench is offline   Reply With Quote