Quote:
Originally Posted by Paul Bjarnason
Brent - That's a good idea, as like you said, you need to adjust and the staples are hard to pull out. What gauge and length nails should I use for the headliner? I already have Ryobi and DeWalt electric tools. Is a brad nailer the same as a tack nailer? Thanks. Bj
|
Use ¾" #10 and tacks you will be fine. Spray some hi-tack adhesive onto the roof rib to temporarily attach to and place 3 or 4 tacks across the headliner listing and keep working it until you know you have it pulled taunt. Sometimes using a drapery steamer is your friend to work the wrinkles out. When you are finished aligning and smoothing, go back and tap the tack in to set the head against the listing.