Quote:
Originally Posted by dmaxweb
Just working on the same thing myself. I was concerned about the spring popping out of the vise jaws. So, I used a piece of all thread, two fender washers, and two nuts compressed to 2-3/4".
Now, what size safety should be used and can the wire be twisted with a common pliers or do I need a safety wire pliers to get it tight?
|
I do like that idea. I used standard black safety wire and twisted it with lineman electrician pliers. They are wide and worked well. Just be sure and put 3 wires equally spaced. The toughest part is getting all the wire out after you install the spring. Good luck
