View Single Post
Old 06-26-2020, 07:04 AM   #6
Senior Member
Mart's Avatar
Join Date: May 2010
Location: Solihull, England.
Posts: 6,718
Default Re: 8BA Valve Guide Removal

Sponsored Links (Register now to hide all advertisements)
This is an 8BA. The valves are not the mushroom type. Just use a spring compressor to remove the valve collets, keeper and spring. Pull the valve out, knock the guide down to release the horseshoe clip. then either pull the guide up or knock it down.

Severe butchery need only be reserved for the older mushroom type.

That's my take on it, anyhow.

Mart is online now   Reply With Quote