Quote:
Originally Posted by Ol' Ron
I really can't see that regulator in the pic very well. I've learned that the input and output are interchangeable on this unit. also I's an 801 marked on the side of the unit. I'll have it hooked up tomorrow, so we'll see how it works. I don't know the output pressure of th etank pump, but in 87 the throttle body EFI system ran on 15 lbs. Thanks for your interest
|
If it was 15 to the TB I would think it would work, sounds like your getting there. 801 on the regulator seems strange, should be 803 or 804. No way the 801 is a poorly stamped 804?