The Ford Barn - View Single Post

Boryca · 02-28-2018, 07:18 PM

There's one right behind the intake manifold at the back of the engine that I always use for direct oil pressure (most of the Ford motors from the 60s have the same spot) and there's one up front that the factory used with a hex nipple and electric oil pressure sender. The one on the front is on the driver's side, just up from the oil filter.

If you have troubles finding it, I can probably take some pics of one I have out on a stand...

Mike

02-28-2018, 07:18 PM	#2
Boryca Member Join Date: Aug 2011 Location: Detroit Posts: 32	Re: Galaxie 289 second oil pressure port? There's one right behind the intake manifold at the back of the engine that I always use for direct oil pressure (most of the Ford motors from the 60s have the same spot) and there's one up front that the factory used with a hex nipple and electric oil pressure sender. The one on the front is on the driver's side, just up from the oil filter. If you have troubles finding it, I can probably take some pics of one I have out on a stand... Mike