The Ford Barn - View Single Post

JWL · 07-20-2021, 04:44 PM

The problem is probably associated to their modern machines which do not have height or girth needed for an entire block to " fit". I use the Kwik-Way portable unit which clamps to the block rather than the block clamping into a machine. Try to find a shop with noted longevity who probably have portable machinery.

07-20-2021, 04:44 PM	#2
JWL Member Emeritus Join Date: May 2010 Location: Fitzgerald, Georgia Posts: 2,204	Re: new valve seats for a 53 EAC The problem is probably associated to their modern machines which do not have height or girth needed for an entire block to " fit". I use the Kwik-Way portable unit which clamps to the block rather than the block clamping into a machine. Try to find a shop with noted longevity who probably have portable machinery.