The Ford Barn - View Single Post - 32 Coupe with F-100 steering conversion

Andy · 07-21-2014, 11:17 AM

The headers are the cheap ones from Speedway. The only problem was the tube by the steering box. I tried a couple of ideas but ended up tight and back and down. With the F100 box, there might be room for a forward and up route. That would better follow the direction of the port.
I used a right side stock manifold for a weld jig

07-21-2014, 11:17 AM	#12
Andy Senior Member Join Date: May 2010 Location: Kerrville, Tx Posts: 2,770	Re: 32 Coupe with F-100 steering conversion The headers are the cheap ones from Speedway. The only problem was the tube by the steering box. I tried a couple of ideas but ended up tight and back and down. With the F100 box, there might be room for a forward and up route. That would better follow the direction of the port. I used a right side stock manifold for a weld jig