The Ford Barn - View Single Post

deuce5wndw · 09-27-2019, 07:18 AM

No shouldn't have to jack it up. Usually it is because the grease is old and dried up in the fittings. Screw them out and clean them and while you have them out check that the grease hole in the bushing is lined up with the fitting.

09-27-2019, 07:18 AM	#3
deuce5wndw Senior Member Join Date: May 2010 Location: Liberty, KY Posts: 898	Re: Greasing No shouldn't have to jack it up. Usually it is because the grease is old and dried up in the fittings. Screw them out and clean them and while you have them out check that the grease hole in the bushing is lined up with the fitting.