View Single Post
Old 10-12-2017, 09:28 PM   #8
SeaSlugs
Senior Member
 
SeaSlugs's Avatar
 
Join Date: May 2010
Location: Central, IL
Posts: 3,968
Default Re: Drag link rubbing tie rod

Quote:
Originally Posted by fredski53 View Post
My 31 Victoria has binding in the steering. I've adjusted the sector, now I've noticed the drag link is rubbing on the tie rod! I've read where if there's a 1/4 inch space between the bottom shackle and the top of the axle then the spring is good. I have a good 1/4 inch space there. Should the shackles be replaced? Would that keep the the two from rubbing? Thanks, Fred
post a side and front picture of your car on level ground and we can probably tell if the car is sitting right.
__________________
1929 Model AA - Need long splash aprons!
SeaSlugs is offline   Reply With Quote