Quote:
Originally Posted by JM 35 Sedan
As TJ said, no rewiring necessary if you use horn button/light switch rod that's correct for the banjo wheel. The end of the rods have the same features, parts, and pieces that will interchange to work with the light switch that's attached to the bottom of the steering box. All you need to do is get all the pieces assembled to the end of the rod correctly so the horn button and switch tabs are in their correct location as per the photo posted by deuce lover.
|
Thanks to you & TJ for that advice. Now if I can find a replacement wheel I'll make sure to get the horn/light rod to match