View Single Post
Old 08-11-2019, 12:01 PM   #8
Brian
Senior Member
 
Brian's Avatar
 
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,834
Default Re: ‘37 aluminum intake stud replacement

Tubman, No, I just use Genuine vicegrips, [not imitation ones], and clamp them onto the stud really tight. This wrecks the stud; it'll be mightily deformed, but will get the offending stud out, although the real stubborn ones may need a bit of heat.
__________________
Unfortunately, two half wits don't make a whole wit!
Brian is offline   Reply With Quote