The Ford Barn - View Single Post

31 A4door · 05-27-2013, 11:33 PM

If I read this right you are saying you have rust on the engine side of the flywheel? If this is so buff it off with wire brush or wheel. If it's the disc side sand it off with sand paper with or with out a DA. The spray SeaSlugs might be talking about is TriFlow. It comes in a can like WD-40 but it much better and more expensive than WD. It has teflon in it ans is much more slippery than WD and does leave a coating on it that does help protect against further corrosion.

05-27-2013, 11:33 PM	#7
31 A4door Senior Member Join Date: May 2013 Location: washington Posts: 102	Re: Rust On Flywheel? If I read this right you are saying you have rust on the engine side of the flywheel? If this is so buff it off with wire brush or wheel. If it's the disc side sand it off with sand paper with or with out a DA. The spray SeaSlugs might be talking about is TriFlow. It comes in a can like WD-40 but it much better and more expensive than WD. It has teflon in it ans is much more slippery than WD and does leave a coating on it that does help protect against further corrosion.