The Ford Barn - View Single Post - Trying to remove the steering wheel from a '31

burner31 · 05-22-2018, 10:11 AM

Removed the steering box, shaft and wheel.
I lossened up the nut, suspended the wheel with two pieces of metal off the ground so that the full weight of the shaft and steering box were on the wheel.
A little oil soaking around the spline, and gave it a good whack with a rawhide mallet
POP, she was loose.

05-22-2018, 10:11 AM	#7
burner31 Senior Member Join Date: Dec 2014 Location: Shawnee, Ok Posts: 3,471	Re: Trying to remove the steering wheel from a '31 Removed the steering box, shaft and wheel. I lossened up the nut, suspended the wheel with two pieces of metal off the ground so that the full weight of the shaft and steering box were on the wheel. A little oil soaking around the spline, and gave it a good whack with a rawhide mallet POP, she was loose. __________________ Keith Shawnee OK '31 SW 160-B