The Ford Barn - View Single Post

glennpm · 10-24-2019, 11:25 AM

So as said here by Mart and JSeery, rotate the steering wheel from either end to the middle, 2 7/16 turns WITHOUT the drag link connected. Adjust the length so the rod ends JUST drop into the holes at the pitman arm and the wheel spindle.

Suggest you re-read all the messages in this thread.

10-24-2019, 11:25 AM	#65
glennpm Senior Member Join Date: Sep 2014 Location: Wiscasset, Maine Posts: 1,981	Re: 36 Ford drag link orientation question So as said here by Mart and JSeery, rotate the steering wheel from either end to the middle, 2 7/16 turns WITHOUT the drag link connected. Adjust the length so the rod ends JUST drop into the holes at the pitman arm and the wheel spindle. Suggest you re-read all the messages in this thread.