The Ford Barn - View Single Post

Synchro909 · 10-12-2021, 11:32 PM

The pinion bearing lock nuts should be way larger than the drive shaft. If yours are not, I'd like to see a picture. The small drive shaft from the Mitchell O/D is much larger than the original one and I have no trouble getting the nuts off over that.

10-12-2021, 11:32 PM	#2
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,504	Re: drive shaft diameter question The pinion bearing lock nuts should be way larger than the drive shaft. If yours are not, I'd like to see a picture. The small drive shaft from the Mitchell O/D is much larger than the original one and I have no trouble getting the nuts off over that. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.