The Ford Barn - View Single Post

pesobill · 03-20-2016, 10:21 AM

I have a 55 Customline, 272, Fordomatic, stk 2bbl. Would anyone with a similar car please provide a photo or two of their carb linkage setup? Or, if you have a diagram that would be great also. A previous owner at one time had a two 2bbls setup and I'm having difficulty figuring out what is stock and what may have been cobbled.
Also, my accelerator pump linkage arm will not stay attached to the 3 hole "cam" that operates the pump. How is that held together - is there a snap ring or?

Thanks very much!

03-20-2016, 10:21 AM	#1
pesobill Junior Member Join Date: Mar 2015 Location: Brush Prairie, Washington Posts: 14	55 Customline 2bbl linkage problem I have a 55 Customline, 272, Fordomatic, stk 2bbl. Would anyone with a similar car please provide a photo or two of their carb linkage setup? Or, if you have a diagram that would be great also. A previous owner at one time had a two 2bbls setup and I'm having difficulty figuring out what is stock and what may have been cobbled. Also, my accelerator pump linkage arm will not stay attached to the 3 hole "cam" that operates the pump. How is that held together - is there a snap ring or? Thanks very much! Last edited by pesobill; 03-20-2016 at 02:08 PM. Reason: Changed Title