Re: Thread size tie-rod 'plug'?
Quote:
Originally Posted by 100IH
Assuming you don't have one, The tool of choice would be an enormous screw driver tip that fits a 1/2" ratchet, fits like a glove is by far the best.
|
I already broke the Bratton's Tie Rod End socket adapter tool. What I got is an end plug that will turn out about 1/4 of a turn and then just dead stops. It HAS to be the threads that are jacked-up. I can turn it back and forth...but, again, no more than 1/4 turn total of travel. I already bent a nice Snap-on screwdriver before I got the Bratton's tool.
__________________
"I have not yet begun to defile myself."
-Doc Holliday
'31 Tudor, '69 F100, '66 Mustang, '11 Ford Flex
|