Quote:
Originally Posted by ktgarcia
Thanks so much for all the advice. There are several mentioned methods that sound good to me. The oil pump was not packed with vasoline so that method is out for me but wished I had asked the question before as I had to take my pan off once.. However, Ol' Ron's suggestion might be something to consider along with others. Ron, did you mean to put some trans oil dow the oil filler tube which is in the back of the motor?
Thanks again for all the advice.
|
The oil filter tube has a restrictor in it, one end or the other depending on the model. there should be two fitting where the oil filter line connects to the bellhousing area of the block. Removing one of these fittings would allow you to get oil into the oil passages.