The Ford Barn - View Single Post

JSeery · 09-05-2019, 07:42 PM

About anywhere that is convenient close to the tank. Some pumps make a bit of noise, might want to mount it on some type of rubber isolator if that concerns you. Also normally want a filter on the inlet side of the pump.

09-05-2019, 07:42 PM	#2
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: electric gas pump on a 39 PU Frame About anywhere that is convenient close to the tank. Some pumps make a bit of noise, might want to mount it on some type of rubber isolator if that concerns you. Also normally want a filter on the inlet side of the pump.