The Ford Barn - View Single Post

[email protected] · 09-11-2013, 07:15 PM

Thanks Paul. It looks like I do not have any options. I do have a pitman arm from Speedway that has an offset. I will try that and see. thanks again. steve

09-11-2013, 07:15 PM	#5
[email protected] Member Join Date: Dec 2012 Posts: 39	Re: 53 merc oil pan in 35 pu frame Thanks Paul. It looks like I do not have any options. I do have a pitman arm from Speedway that has an offset. I will try that and see. thanks again. steve