View Single Post
Old 03-23-2018, 10:31 AM   #10
Garagekulture13
Senior Member
 
Garagekulture13's Avatar
 
Join Date: Nov 2015
Location: Tennessee
Posts: 125
Default Re: Chasing the knock.

Quote:
Originally Posted by Patrick L. View Post
Can you tell about where the knock seems to be coming from ?

Have you checked the lash of the timing gears ? Anything more than about .009" and they'll rattle. Yours don't look very good from the picture, but, checking the lash is whats needed.

Running the engine with the timing pin inserted and putting pressure on the gear is sometimes a good way to determine if the gear is bad/worn.
I ran with the side cover off and it sounded to me to be coming from the front of the engine. That's what led me to pull the timing gear cover. I will check the lash.

Sent from my SM-N950U using Tapatalk
Garagekulture13 is offline   Reply With Quote