View Single Post
Old 02-09-2018, 11:31 AM   #4
Senior Member
CB919ER's Avatar
Join Date: Jul 2016
Location: Chattanooga, TN
Posts: 114
Default Re: unusually headlight issue

Originally Posted by BillCNC View Post
Wired back correctly?


Did you remove the bulb's, if so you possibly flipped one bulb 180. The high beam's should be on top and low beam's on the bottom.

That's what I was thinking, I'm just glad to get confirmation from someone else.

Originally Posted by jwilliams81 View Post
Yep. I am guessing you just need to switch the wires on the side that isn't low beam when you have the headlight switch set to low beam.

The black wire holder has the color wire that should be in each slot marked on it.
R= Red
G= Green

That black holder can only go into the socket one way.
I don't have those. I have cowl lights and only have two wires going into my headlights.
CB919ER is offline   Reply With Quote