The Ford Barn - View Single Post - Spark lever position at idle and temperature sensitivity

Big hammer · 03-16-2024, 12:41 PM

700 rpm’s are high, set it as low as you can, you can always use the hand lever to increase the idle. Clashing gears going into 1st sitting still may indicate clutch issues, push the clutch in and count one thousand two thousand three thousand and then put into 1st. Then you adjust the idle speed adjust the idle mixture

03-16-2024, 12:41 PM	#9
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,134	Re: Spark lever position at idle and temperature sensitivity 700 rpm’s are high, set it as low as you can, you can always use the hand lever to increase the idle. Clashing gears going into 1st sitting still may indicate clutch issues, push the clutch in and count one thousand two thousand three thousand and then put into 1st. Then you adjust the idle speed adjust the idle mixture __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done