03-09-2019, 10:50 PM
|
#9
|
Senior Member
Join Date: May 2010
Location: 60615,330th Ave.,Clare, Iowa, 50524
Posts: 1,457
|
Re: Kwik Way Boring Bar Fixtures
Quote:
Originally Posted by Jim Brierley
There are 2 fixtures, one at each end, that locate the bar. First you mount the bar to the pan rails, using the appropriate steel rails. (I made my own out of square tubing, and the length I wanted) then bolt these fixtures to the block via the main bolts, slide the bar in and secure the 4 stanchions. Not sure if stanchions is the right word?
|
They are called " Bar Bearings " Mr. Jim.
Herm.
|
|
|