Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Jim in S.C.
I use one on my pickup. I couldn't just wire it to the ignition switch. It would kill the current going to distributor. I had to put a toggle switch to operate the valve. If there is a way to hook it up to the ignition switch would someone please share the wiring diagram with me.
|
This is the instruction sheet that came with my cut-off. It simply changes the
switched wire on the coil from the ground (points) to the hot and then you can add the solenoid on that same switched lead. Took me about 15 minutes.
Ignition3.jpg