View Single Post
Old 03-05-2012, 10:34 AM   #7
Junior Member
dduke's Avatar
Join Date: Feb 2011
Location: Binghamton NY
Posts: 5
Default Re: Ventilating the Flat Head!

Not all intakes are created equal. I ran a super dual with a pair of Holley 94's that had a fitting and tube that went back to the breather/oil fill tube at the rear of the intake. My current offy and single quad is set up a bit different and the breather at the rear is fine. I use the fitting at the rear of the intake below the carb as my vacuum and trani set-up.
dduke is offline   Reply With Quote