View Single Post
Old 09-28-2019, 02:24 PM   #4
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 9,022
Default Re: 1929 Hood Latches won't reach

Quote:
Originally Posted by walkerlakeprinter View Post
I can see that the hood lits a little high in relation to the line at the gas tank.
But the latches don't reach there or at the radiator. I raised the cowl about 1/4" to close the gap between it and the hood a bit. But the latches didn't reach even before I did that.


Is this a Fordor?

Also, can we see a picture of the cowl lacing? If the lacing is too thick, it will cause the hood to set higher than it should be.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote