The Ford Barn - View Single Post - 31 model a differential drive shaft removal technique

Synchro909 · 12-26-2019, 03:40 PM

I don't pull the shaft and pinion out - I push them out. With all of he innards removed from the banjo, I use a small hydraulic kack in there to push it out. Sometimes it takes a bit of pressure and I get concerned about distorting the banjo so I use a little heat around the pinion bearing housing.
Easy!

12-26-2019, 03:40 PM	#10
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,496	Re: 31 model a differential drive shaft removal technique I don't pull the shaft and pinion out - I push them out. With all of he innards removed from the banjo, I use a small hydraulic kack in there to push it out. Sometimes it takes a bit of pressure and I get concerned about distorting the banjo so I use a little heat around the pinion bearing housing. Easy! __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.