Re: Toe-in tools - easy and accurate
Great idea, but as I recall the 1/16 is based on the distance between the tires, and taken from 6 " above the floor. So if your tube is approximately the same length as the distance from stud to tire centerline, and the car is jacked up just the same height as the tire. Then taking this measurement 6 inches above the floor should put you dead nuts.
__________________
Bill Worden
1929 Roadster
1929 Briggs Town Sedan
1930 Closed Cab pickup
Smith Motor Compressor
1951 Ford F1
High Desert Model A's
|