The Ford Barn - View Single Post

big job · 07-19-2018, 04:16 AM

I have worked on many industrial or big trucks & buses. Most had condensers about
the size of a C flashlight battery mounted on the coil and a lot of those were 12 vt pos
ground coil mounted on the fire wall. I still have some of those big condensers & they
have a screw on top. Now I think about it, think I'll try one. I remember never had
condenser problems on those.. Also the coil was as big as a finned coffee can. sam

Just remembered there was no resistor either

07-19-2018, 04:16 AM	#7
big job Senior Member Join Date: Sep 2013 Location: Dighton, Mass Posts: 1,230	Re: Changing condenser location I have worked on many industrial or big trucks & buses. Most had condensers about the size of a C flashlight battery mounted on the coil and a lot of those were 12 vt pos ground coil mounted on the fire wall. I still have some of those big condensers & they have a screw on top. Now I think about it, think I'll try one. I remember never had condenser problems on those.. Also the coil was as big as a finned coffee can. sam Just remembered there was no resistor either