Quote:
Originally Posted by Steve Plucker
We are NOT talking about the Clutch and Brake Pedal Shaft A-7506...We are talking about the Clutch Release Shaft A-7510.
Synchro909...Yes, what Steve says is true, bushings are sold for the Clutch and Brake Pedal Shaft for 1929-1931 for the Clutch and Brake Pedals used on that shaft...However that shaft, when mated to the Bell housing has NO bushings there 1928-1931.
Pluck
|
Without wanting to be confrontational, what you guys seem to have missed is that the pedal shaft is NOT the same size as the throwout shaft. The bushes you are referring to (A 7508) will NOT fit. The pedal shaft A 7506 is 7/8" diameter while our pedal shaft is 1" diameter and not available. Sure, those bushes will do the throwout shaft in the bell housing but not the pedals ut you are correct in so far as there are no bushes between the pedal shaft and the bell housing.