Quote:
Originally Posted by 1931 flamingo
I need to install the hose fitting in the lower radiator hose on my 40 coupe. Any hints/instructions on how to "cut" the hose to install??
Thanks in advance for any help.
Paul in CT
|
I place a block within the hose to support it. I then use a hole punch of a slightly smaller diameter than the diameter of the nipple.
DO apply Indian head Shellac to both sides of the fitting plates when doing the actual installation.
I trust you realize the nipple is NOT at the top of the hose. Rather, it is about 30° rotated to the right.