The Ford Barn - View Single Post

CrazyTed · 08-28-2019, 02:16 PM

Ok, found the numbers on the transmission. On the ID tag, it says "PAR-7003 C2" and "110-23066" I used a camera and looked on the side of the trans housing and found this molded into the casting. "PAK 7006-C W1 . It has 14 bolts on the pan. It has the dipstick into the pan, not the casting. It has trans coolers on the passenger side. It does not have the vacuum housing on the trans.

08-28-2019, 02:16 PM	#47
CrazyTed Junior Member Join Date: Nov 2018 Location: Virginia Beach, VA USA Posts: 10	Re: New to 312 Y Block Ok, found the numbers on the transmission. On the ID tag, it says "PAR-7003 C2" and "110-23066" I used a camera and looked on the side of the trans housing and found this molded into the casting. "PAK 7006-C W1 . It has 14 bolts on the pan. It has the dipstick into the pan, not the casting. It has trans coolers on the passenger side. It does not have the vacuum housing on the trans.