The Ford Barn - View Single Post

MrWzrd · 01-01-2014, 08:21 PM

Am I understanding it correctly?
The top on my leatherback is simply laid over padding, stretched and tacked down around the edges?

I want to make sure there are no adhesives used as I need to remove the gutters for repair and while they are off I want to "peel back" the top at the front corners to repair a bad spot of wood where a missing clip allowed it to be exposed.

Any special trick to the separating the gutter from its inner mounting rail?

01-01-2014, 08:21 PM	#1
MrWzrd BANNED Join Date: Oct 2013 Posts: 158	Leatherback top just tacked on? Am I understanding it correctly? The top on my leatherback is simply laid over padding, stretched and tacked down around the edges? I want to make sure there are no adhesives used as I need to remove the gutters for repair and while they are off I want to "peel back" the top at the front corners to repair a bad spot of wood where a missing clip allowed it to be exposed. Any special trick to the separating the gutter from its inner mounting rail?