The Ford Barn - View Single Post

Lawson Cox · 11-28-2021, 04:07 PM

Sponsored Links (Register now to hide all advertisements)

DO NOT APPLY PRESSURE TO THE BULB ITSELF OR YOU'LL BE SORRY. Before you start trying to unscrew the fitting, first apply a generous application of ATF/Acetone (50/50 mix) to the threads and gentle tapping all around as you gently try to loosen it up. Patience and ease are your friends here. Charles Atlas is not your friend here, if you are old enough to remember him. Good Luck. Lawson

11-28-2021, 04:07 PM	#3
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,009	Re: 1937 mechanical temp sender removal help Sponsored Links (Register now to hide all advertisements) DO NOT APPLY PRESSURE TO THE BULB ITSELF OR YOU'LL BE SORRY. Before you start trying to unscrew the fitting, first apply a generous application of ATF/Acetone (50/50 mix) to the threads and gentle tapping all around as you gently try to loosen it up. Patience and ease are your friends here. Charles Atlas is not your friend here, if you are old enough to remember him. Good Luck. Lawson __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".