The Ford Barn - View Single Post

jwharton35 · 08-19-2020, 01:34 AM

hey guys this is alaska jims friend with the helmet distributor. i just figured out today that my left side rotor cap was moved the tab that holds it in place must have broke off. i moved it back to where it needs to be however it is still retarded as in timing snd if i move it closer to where it should be it doesnt like to run well. my thought is maybe the vacuum advance is not working properly?any advice is welcome. also i do have petronix on it and did their tests.

08-19-2020, 01:34 AM	#14
jwharton35 Junior Member Join Date: Jun 2016 Location: palmer alaska Posts: 4	Re: helmet distributor hey guys this is alaska jims friend with the helmet distributor. i just figured out today that my left side rotor cap was moved the tab that holds it in place must have broke off. i moved it back to where it needs to be however it is still retarded as in timing snd if i move it closer to where it should be it doesnt like to run well. my thought is maybe the vacuum advance is not working properly?any advice is welcome. also i do have petronix on it and did their tests.