Re: 1936 bumper black line
I am going to use 2 part primer and 2 part (not 2 stage) black paint only because I have it left over from other projects. Otherwise I would just use ACE gloss black oil base paint.
I also used green frog tape, but could have used HD blue tape, and cut it on glass 1/4 wide to go in the middle and left 3/16 open for paint. I also used the 1/4 tape for the outside edges just because it was easier to curve. Once I hear back from Peter in NH to make sure the 3/16 for the line is correct, I'll paint the lines with a brush.
|