The Ford Barn - View Single Post

Daves55Sedan · 07-13-2022, 12:19 AM

If you try to put the clip on upside down, the rotor won't go on, because the clip hooks are in the way. With the hooks facing down, the bottom of the rotor is well clear of the hooks.
Even if those hooks weren't there, and you could put the rotor on with the clip upside down, you would not have the advantage of the bump-out in the tab to keep the rotor on tight to the dizzy shaft.

07-13-2022, 12:19 AM	#10
Daves55Sedan Senior Member Join Date: May 2010 Location: Granite City, Illinois Posts: 3,008	Re: 54 y block dist. rotor clip If you try to put the clip on upside down, the rotor won't go on, because the clip hooks are in the way. With the hooks facing down, the bottom of the rotor is well clear of the hooks. Even if those hooks weren't there, and you could put the rotor on with the clip upside down, you would not have the advantage of the bump-out in the tab to keep the rotor on tight to the dizzy shaft.