Quote:
Originally Posted by Y-Blockhead
I can agree with that to a point. The spindle will only turn until it hits the King Pin Locking Bolt Nut (Turn Stop). The spindle can not turn any farther than that. It does not matter how far the drag link can move, the spindle is not going to move any farther once it hits the stop.
As I stated before, mine hits the stops in both directions with the shorter pitman arm, so the turn radius is the same.
|
I agree that the spindle can't move any farther after it hits the stops . Maybe the cars with seven tooth steering are effected the most . I use the shortened pitman arms on most of our model A's because they steer easier with them . The shorter pitman arm does change the turning radius for some reason . No harm meant .