10-15-2019, 06:15 PM
|
#15
|
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,408
|
Re: Cam Degreeing/Checking Important
Quote:
Originally Posted by frnkeore
I know that it's a lot of info to take in, in one shot. It's the same for everyone!
Do it a few times and you'll always remember it. My first time at doing this was with a twin cam engine, in 1974, you have to set one cam, decreed properly, then set the other cam, to that cam.
Very, very frustrating for someone that had never done it and I think that's why I've remembered it, all these years.
|
Was the first time an Offy or a NOVI?
Last edited by Pete; 10-15-2019 at 06:25 PM.
|
|
|