View Single Post
Old 09-19-2021, 10:20 PM   #8
PepeLoco
Senior Member
 
PepeLoco's Avatar
 
Join Date: Feb 2011
Location: Austin
Posts: 118
Default Re: So, I have apparently blown head gasket

Quote:
Originally Posted by Oldgearz View Post
A good cleanout after oil in antifreeze can be done with liquid dish soap, after the oil leak cause is fixed. Drain old antifreeze and replace with water and a quarter cup liquid dish soap. Run engine for 15 minutes until hot. Drain block and radiator (pull lower hose and open draincock. Repeat this process. After second drain, run engine with radiator draincock and engine draincock open and a hose with clean water running into the radiator top. Run motor until water coming out of draincock and radiator is clear. Messy...but works great. Refill with new antifreeze.
I believe he mentioned that he has water in the oil.guess he is running water and not coolant.
I was also wondering how to clean the oil, other than change the oil.
PepeLoco is offline   Reply With Quote