Thread
:
Odd Failure
View Single Post
07-02-2019, 07:50 AM
#
12
Jacksonlll
Senior Member
Join Date: Jul 2012
Location: Michigan-- Member of Oakleaf of MARC
Posts: 1,686
Re: Odd Failure
A tough one I ran into was a bad, or corroded crimp between the cable and the end-cable fitting. It measured 6 volts, but would not pass heavy current. Check those crimps.
Jacksonlll
View Public Profile
Send a private message to Jacksonlll
Find More Posts by Jacksonlll