The Ford Barn - View Single Post

Ross F-1 · 04-26-2018, 10:41 PM

That would be the Holley 2110, used on Y-blocks. It is based on the 94 but with some improvements and higher flow, bigger throttle bores and venturis.

04-26-2018, 10:41 PM	#64
Ross F-1 Senior Member Join Date: Nov 2010 Location: NM Posts: 2,438	Re: 8RT pulling the heads That would be the Holley 2110, used on Y-blocks. It is based on the 94 but with some improvements and higher flow, bigger throttle bores and venturis. __________________ '52 F-1, EAB flathead