The Ford Barn - View Single Post

Jim Brierley · 01-31-2019, 07:17 PM

I have a Model B engine that I run on the Bonneville salt flats. The engine has been run for many years, is still using the babbitt main bearings that were installed in the 1960's. Last run in 2013 at 167 MPH. Babbitt is great for mains and good for rods but not quite as good. Engine is full pressure oiling and full flow filter.

01-31-2019, 07:17 PM	#11
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,087	Re: Babbitt I have a Model B engine that I run on the Bonneville salt flats. The engine has been run for many years, is still using the babbitt main bearings that were installed in the 1960's. Last run in 2013 at 167 MPH. Babbitt is great for mains and good for rods but not quite as good. Engine is full pressure oiling and full flow filter.