The Ford Barn - View Single Post

glennpm · 10-07-2019, 05:53 PM

Hi David,

The fork is going to push and cut on the bottom side of the boot when you try to get the rod end out. If you have one slide it in place and you can see this. Most of the time, you will also have to hammer the side of the spindle to get it out. Just trying to give you advice, been there done that ....

10-07-2019, 05:53 PM	#45
glennpm Senior Member Join Date: Sep 2014 Location: Wiscasset, Maine Posts: 1,981	Re: 36 Ford drag link orientation question Hi David, The fork is going to push and cut on the bottom side of the boot when you try to get the rod end out. If you have one slide it in place and you can see this. Most of the time, you will also have to hammer the side of the spindle to get it out. Just trying to give you advice, been there done that ....