Re: Help: Reverse eye leaf spring problem 34 Ford
Never weld a spring or heat bend... on any spring metal. Yikes!!! (maybe when cutting a coil off a later 50s front end, big coil springs)
They might have gave it a bit more arch when reversing it making it shorter some and also adding height. You could have them Flatten it a bit since you are doing this to lower the car.
There was a how-too thread on the HAMB many moons ago about reversing a spring. First thing you did was use some chalk on the garage floor and outline the arch of the main spring... oops I see it's posted above. Also what Pete said.
Installing a reverse eye is more funner too
.
Last edited by Tinker; 08-21-2019 at 08:28 PM.
|