View Single Post
Old 01-03-2021, 09:49 PM   #15
Tim Ayers
Senior Member
Join Date: May 2010
Location: NJ
Posts: 4,547
Default Re: Frame - is it straight?

Originally Posted by BRENT in 10-uh-C View Post
Clamp a string onto the front and the back of each frame rail and pull the string taunt. You will see really quickly if it is bent. Also check the measurements diagonally to verify that the measurement is the same in an 'X' pattern.

Plenty of information how to heat shrink a frame back to being straight here in the archives.

Agreed. Quick and dirty way to tell
Tim Ayers is offline   Reply With Quote